Tranny tube is use as an important component of the transmission system in vehicles and are responsible for circulating transmission fluid to cool down the transmission system. Tranny tube is an important part of cars and bikes because it carries fluid from the car and bike engines to get the optimal performance and longevity of the transmission components.
This tube helps keep the vehicle from rusting, so it runs smoothly. The car’s performance will decline if a tube gets jamm with dust or debris. And it’s nearly impossible to drive a car. Therefore, it must be change occasionally to make sure the tube is working properly.
By reading this experts guide you will be able to understand how to choose and use the correct tranny tube for your vehicles. You will able to fine the issues quickly and you can solve the problems easily.
Table of Contents
What is the function of a tranny tube?
After the house, the car is the most highly expensive and valuable investment in anyone’s life. One has to review 100 options before purchasing a car. However, the task is still not over yet. Once you have bought your dream car, it is important to maintain it and take proper care to avoid damage and improve its life span. From washing it regularly to deep cleaning the interior, checking the brakes, and changing lubricants,
- Along with these, one of the most important components of car maintenance is the tranny tube. Most cars face problems with frequent transmissions. The purpose of this tube is to transfer hydraulic fluid to keep the automotive parts working smoothly.
- Transmission fluid acts as a lubricant. Move through gear clutches and bearings. By exposing the liquid to air or coolant, tranny tubes can therefore prevent transmission overheating. So, the tranny tubes are essential to cool the transmission fluid.
What are the benefits of tranny tube?
If you are using tranny tubes, then your vehicle can perform longer and better. There are the following benefits to tranny tubes:
- These tubes run between the transmission and radiator and allow more propulsion.
- It helps reduce gas use by reducing emissions and increasing fuel efficiency.
- Tranny tubes improve transmission health as compared to traditional transmissions, which wear down faster.
- Tranny tubes also increase wheel hopping when driving in snow or wet conditions.
- These tubes prevent fluid overflow in the torque converter, which causes internal damage or leaks.
Working of the tranny tube
Most internal cylinders contain valves known as Schrader or presto that are made specifically to handle the wheel type. For this, some of the thick cylinders inside are sucked out. If high-pressure air is inflated into the puncher tire, it may expand. The self-fixing tubes add an extra layer during rotation, which keeps the wheel from leveling. Due to their ordinary designs, these tubes function well.
How to choose the right tranny tube?
When selecting the tranny tube, you should know the following things:
- First and foremost, focus on the quality of the tube. Some moderate tubes are budget-friendly, but recognized brands have a track record for tube performance and reliability.
- Along with the overall design of the tranny tube, rubber thickness and weight should be considered.
- When racing or trial riding, it’s best to be ready to handle a flat tire in case you run into trouble. Therefore, always select tubes that are easy to install to save time.
- You have to replace the tube every six months if it is not of good quality. Hence, always select the tranny tube that is long-lasting and has an excellent inner tube that lasts for ten years or more.
- The size of the tube is also an important thing to discuss while buying a tranny tube for your vehicle. Some of the store guys misguide you into thinking that this smaller tube will fit you in your wheel, but check your wheel diameter and width, and you can easily examine your tube size according to your wheel.
- You should take care of it before running the tube because the rim causes leakage.
- Tranny tubes are made with two types of materials: butyl and latex. Both of these tubes have negative and positive views on quality. The thin latex material has more flexibility and resistance, but on the other hand, due to the faster air-leaking process, it shows less safety. On the contrary, butyl material has lightness and is more sensitive, but it is safe as it does not have a quick air-leaking process.
- The route also plays a significant role in selecting the tube. Ensure that it is both compatible and comfortable.
- Always select the tube that increases the torque and passage of liquid and enhances the efficiency of the vehicle.
What happen when tranny tube not work properly ?
If the car faces any mechanical issues due to a tranny tube malfunction, then it’s impossible to drive a vehicle. Transmission fluid in the gearbox is required for proper functioning. These tranny tubes increase the speed and performance of transmission fluid and allow it to operate efficiently. Therefore, it breaks if the amount of transmission fluid is insufficient. So, tranny tubes increase vehicle performance.
Maintenance tips
To avoid the above-mentioned problems, here are a few tips that help boost the speed and performance of the vehicles.
- Regular inspection
Check your tranny tube regularly; either there is some kind of leakage, crack, or damage. If you find such issues, fix them immediately; otherwise, it becomes crucial if there is any problem with fluid transmission.
- Fluid replacement
Replace your fluid every six months or as recommended by the manufacturer. This may help to remove the pollutants present in the fluid that reduce tranny tube function.
- Fluid check
The transmission fluid and tube health depend on the liquid quality and level. Therefore, as the vehicle manufacturer advises, regularly check your fluid level to ensure that the tranny tube is functioning properly.
Types of tranny tubes
If you want to select the ideal tranny tube for your car to enhance its engine efficiency, then choose the one that meets the needs of your vehicle. Some of the tubes are named according to their components, but others are named based on their style. Each tranny tube has its own specialty. There are different types of material used in tranny tubes:
Stainless steel tranny tube.
Stainless steel is the genuine type of tranny tube you want to purchase. The tubes made from stainless steel material are ideal and improve car efficiency. If you want to choose a specific one, then these tranny tubes are the best option.
Butyl rubber tranny tube
These tranny tubes are named according to their style. If you want to purchase something innovative and fashionable, then pick this one. These are the most flexible trunk tubes. Every condition can be fully met if you select these butyl rubber-made tranny tubes.
Self-sealing tranny tube
This tube has a special type of feature in that it has a seal inside it that fills the air in the vehicle tube as it gets punctured. And you can easily change it later. These tranny tubes are made of a solid or liquid plug.
Shemale tranny tube
This is the most common and well-known tranny tube. This tube has two free ends, and you can easily attach them to other tubes or lengthen them according to your needs. These tranny tubes increase the passage of fluid but decrease torque.
Standard tubes
The standard tubes are made of plastic, steel, aluminum, and rubber. These are used in a number of vehicles.
High-performance tranny tube
High-power tranny tubes are effective due to their high performance and long-lasting activity. These are made from steel and titanium and perform better than standard tubes.
Custom tube
Custom tranny tubes are made according to people’s demands and their specifications that suit the vehicle’s dimensions. To meet the specific demand and if you want your vehicle to perform better and last longer, then choose a tranny tube that meets your demand and automobiles.
The top 10 tranny tubes.
TH350, TH400, and 700R4 Tranny Tube
This transmission tranny tube is one of the top-rated options on the market. It is made of stainless steel to prevent rust. This transmission tube is designed to easily fit into any engine bay, but it’s mostly for vehicles manufactured by General Motors under its brand, including Chevrolet and Big.
Lubegard 19610 Dr. Tranny Tube
This is popular among auto enthusiasts; it comes in a pack of two and promises to be the best transmission with a fixed spark. This transmission tool features the five-time concentrated friction modifier formula for eliminating transmission shoulders. Lubegard 19610 is not basically a transmission tool; it’s rather sold with a transmission tube for use in different vehicles except for type F and CVT applications.
1409 KMT TH350 TH400 tranny tube.
From the design to the performance, you would come to love this female transmission tool, which is a 75 stainless steel flexible dipstick with a machined billet aluminum handle. The build makes it difficult for dipsticks to rust, and it fits into the engine bay perfectly. Interestingly, this tube is incredibly cheap and still delivers great performance.
TASAN racing flexible tranny tube
This is one of the best you can buy for the Chevy or GM car transmission. It works best for the TH350 350 turbo 50 missions. This transmission tube is also made from stainless steel to avoid rusting. So, at last, it’s pretty much longer than the other ones. You may want to get a rubber grommet to use this transmission tube for optimal performance.
An amazing stainless tranny tube.
This tube is from a notable brand (extremely amazing) in this space. Its transmission tubes fit perfectly and offer great value for the price. This tranny tube contains a flexible dipstick that is no different from the ones listed above. It doesn’t rust easily and bends to fit into the engine bay properly.
JahyShow transmission tranny tube.
This is an impressive stainless steel tranny tube for GM vehicles. This transmission tube is built to last, and its flexible design makes it easily fit into any engine bay. It features a machine billet handle and a stainless steel braided housing to checkmate leaks. This tranny tube lasts pretty long, based on user reviews.
Licbund TH-350/TH-400 turbo
This is one of the best tubes you can buy at the moment. It is literally the highest-rated transmission tube on Amazon. It fits into the firewall perfectly. You can confidently use this transmission tube on turbo 350 and turbo 400 transmissions. It looks great inside any engine bay and comes with a filler tube.
YESHMA transmission dipstick
This tranny tube is shiny and sturdy. This transmission dipstick is built for TH-350, TH-400, and R-700 turbo transmissions. It has a very strong view, but it is also very flexible and easy to install, just like the others. It is made with a stainless steel material that is resistant to abrasion and yet lightweight.
KQIANG tranny tube
This tube is a firewall-mounted transmission tube. You can trust TH-350 transmissions. It is built to avoid rust and corrosion and lasts for a very long time. This tranny tube contains a mounting tube that can be easily install without any help.
Read Also: 3 Types of Equipment That Transformed the Fire Service Industry
Conclusion
The two main functions of tranny tube torque and lubrication are responsible for the vehicle’s longevity and performance. There are different types of transmission tubes available in the market make by various materials, like stainless steel, aluminum, rubber, and plastic. But mostly, we prefer to use stainless steel to avoid corrosion and rusting.
